NuRAD NuEVI battery indicator says Alkaline, but it has a LiPo installed

[wshNPC]

My OLED indicator shows alkaline batteries installed. I don’t see a battery compartment, so I’m going to guess that the LiPo batteries are indeed in place, but the incorrect setting leaves me concerned that a setup was not performed on this instrument. That screen also shows the firmware version number as 1.5b7.

[windsynthhelp]

The NuRAD/NuEVI does not have a way to tell by itself what battery type is installed, so it’s a manual setting in the EXTRAS menu, BAT TYPE. For LiPo battery (which indeed is installed in your instrument) it should be set to LIP for correct display of battery level.