EWI fingering issue

Discussions specific to the NuRAD
Post Reply
wshNPC
Posts: 84
Joined: Tue Aug 30, 2022 10:49 pm

EWI fingering issue

Post by wshNPC »

I seem to be having trouble with the fingering on my unit. It is programed for EWI fingering but it is not acting right. Open C# is playing lower than B and when I go down the register from C to G, G plays higher than A. Same with E which players higher than F when I go down the register. Not sure what is wrong.
windsynthhelp
Site Admin
Posts: 72
Joined: Tue Aug 23, 2022 7:03 pm

Re: EWI fingering issue

Post by windsynthhelp »

I can think of two things:

1. Check that none of the pinky keys touch each other or main keys. Also check bis key and side key so they don’t touch the main keys next to them.

2. If touching keys isn’t the cause, it might be the touch sense that needs adjusting, but touching keys is more likely the cause when it behaves like this.
Post Reply