NuRAD NuEVI battery indicator says Alkaline, but it has a LiPo installed

Discussions specific to all Berglund Instruments.
Post Reply
wshNPC
Posts: 84
Joined: Tue Aug 30, 2022 10:49 pm

NuRAD NuEVI battery indicator says Alkaline, but it has a LiPo installed

Post by wshNPC »

My OLED indicator shows alkaline batteries installed. I don’t see a battery compartment, so I’m going to guess that the LiPo batteries are indeed in place, but the incorrect setting leaves me concerned that a setup was not performed on this instrument. That screen also shows the firmware version number as 1.5b7.
windsynthhelp
Site Admin
Posts: 72
Joined: Tue Aug 23, 2022 7:03 pm

Re: NuRAD NuEVI battery indicator says Alkaline, but it has a LiPo installed

Post by windsynthhelp »

The NuRAD/NuEVI does not have a way to tell by itself what battery type is installed, so it’s a manual setting in the EXTRAS menu, BAT TYPE. For LiPo battery (which indeed is installed in your instrument) it should be set to LIP for correct display of battery level.
Post Reply