How long does a full charge for the LiPo generally take?

Discussions specific to all Berglund Instruments.
Post Reply
wshNPC
Posts: 84
Joined: Tue Aug 30, 2022 10:49 pm

How long does a full charge for the LiPo generally take?

Post by wshNPC »

I want to make sure I charge my NuRAD or NuEVI LiPo properly first time. Is there some guidelines for me to follow?
windsynthhelp
Site Admin
Posts: 72
Joined: Tue Aug 23, 2022 7:03 pm

Re: How long does a full charge for the LiPo generally take?

Post by windsynthhelp »

With the LiPo battery solution installed, the NuRAD or NuEVI has got three positions on the power slide switch instead of two.

The switch positions are:

[ • ] [ ] [ ]

Leftmost position – Power ON from battery, battery time 15+ hrs

[ ] [ • ] [ ]

Mid position – Power OFF, battery charge when USB is connected to a USB power adapter (500mA or higher) Charges to 80% in 3.5hrs, 100% in 5.5–6 hrs. The red LED in the battery compartment is lit until the battery is fully charged.

[ ] [ ] [ • ]

Rightmost position – Battery power off, power ON from USB if connected (no charging, low power consumption)

If the red LED in the battery compartment does not stop glowing after the NuRAD or NuEVI has been sitting overnight with USB connected and switch in middle position, the charge setting is probably off...
Post Reply