Search found 18 matches

by windsynthhelp
Fri Sep 30, 2022 5:33 pm
Forum: Berglund Instruments NuRAD
Topic: Verify that my NuRAD has a LiPo installed
Replies: 1
Views: 6

Re: Verify that my NuRAD has a LiPo installed

The bottom compartment of the NuRAD has two knurled thumb screws that can easily be removed to investigate the location of the LiPo battery system. For base models, this compartment contains space and ability to insert standard AAA batteries, Otherwise, you will see evidence of the LiPo battery inst...
by windsynthhelp
Fri Sep 30, 2022 3:55 pm
Forum: Berglund Instruments - General
Topic: How long does a full charge for the LiPo generally take?
Replies: 1
Views: 8

Re: How long does a full charge for the LiPo generally take?

With the LiPo battery solution installed, the NuRAD or NuEVI has got three positions on the power slide switch instead of two. The switch positions are: [ • ] [ ] [ ] Leftmost position – Power ON from battery, battery time 15+ hrs [ ] [ • ] [ ] Mid position – Power OFF, battery charge when USB is co...
by windsynthhelp
Mon Sep 26, 2022 8:14 pm
Forum: Berglund Instruments - General
Topic: trouble setting up my Bluetooth module
Replies: 3
Views: 13

Re: trouble setting up my Bluetooth module

What wireless midi system are you using?
by windsynthhelp
Fri Sep 23, 2022 7:30 pm
Forum: Berglund Instruments NuEVI
Topic: Lever sensor adjust
Replies: 2
Views: 8

Re: Lever sensor adjust

When using the lever for CC or glide control it's unidirectional, working only in push forward/down direction. The positive/negative thing only comes in use for the vibrato, and then it's handled by the vibrato algorithm (and corresponding vibrato settings), and not at all affected by the threshold/...
by windsynthhelp
Fri Sep 16, 2022 6:09 pm
Forum: Berglund Instruments - General
Topic: NuEVI NuRAD special key enable
Replies: 6
Views: 38

Re: NuEVI NuRAD special key enable

In the newer versions (firmware) there is no enable in the special menu (both NuEVI and NuRAD) but controlled by polyplay mode setting. mode: off disables special key.
by windsynthhelp
Fri Sep 16, 2022 6:07 pm
Forum: Berglund Instruments - General
Topic: NuEVI NuRAD special key enable
Replies: 6
Views: 38

Re: NuEVI NuRAD special key enable

Same enable in the menu (polyplay)
by windsynthhelp
Fri Sep 16, 2022 6:05 pm
Forum: Berglund Instruments - General
Topic: NuEVI NuRAD special key enable
Replies: 6
Views: 38

Re: NuEVI NuRAD special key enable

the NuRAD is divided into two keys to make it less easy to activate by accident. Right hand between rh1/rh2 and rh2/rh3. (check out this pdf -> https://github.com/Trasselfrisyr/NuEVI/ ... erview.pdf) ...
by windsynthhelp
Thu Sep 01, 2022 5:15 pm
Forum: Berglund Instruments - General
Topic: NuEVI & NuRAD 5pin DIN MIDI
Replies: 2
Views: 22

Re: NuEVI & NuRAD 5pin DIN MIDI

I forgot to mention, they all have CV outputs, ... so there could be 4 output options total (3 MIDI, 1 CV)
by windsynthhelp
Thu Sep 01, 2022 2:54 pm
Forum: Berglund Instruments NuRAD
Topic: I’m experiencing a yellow LED on
Replies: 5
Views: 39

Re: I’m experiencing a yellow LED on

I'm pretty certain this is the threshold setting for the Extra controller. Go into MENU > ADJUST then scroll down to EXTRA CONTROLLER click enter, it will allow you to adjust the threshold. You will see a tiny pixel. Adjust the threshold line so that it is to the right of the pixel (to your liking) ...